When your lights flicker, your breaker keeps tripping, or you need a panel upgrade before a solar install, you need an electrician who picks up the phone and shows up ready to work. Valley Air and Electric has been doing exactly that for Sacramento homeowners, landlords, property managers, and businesses since 1992. We offer same-day availability on most jobs, transparent pricing with no surprises, and work performed by licensed electricians who treat your home or building the way they would their own.
Whether you need a single outlet repaired or a full service upgrade, we handle it with the same attention to detail that has kept this community calling us back for over three decades.
Simple booking. Clear pricing. Safe, solid wiring.
Call (279) 249-3289 for a quote today.
Most homeowners can't tell a minor wiring issue from a serious one, and that uncertainty is exactly why a thorough diagnosis matters. When the lights flicker, an outlet goes dead, or a breaker trips every time you run the microwave, something in the circuit is telling you it needs attention. We start every repair visit by finding the actual source of the problem, not just the symptom.
Our repair work covers the full range of everyday electrical issues: dead outlets, tripping breakers, warm switch plates, intermittent power loss, and wiring that was never quite right to begin with. We also address GFCI and AFCI protection as part of a repair visit when the existing setup does not meet current code, and we check grounding and bonding wherever the job calls for it. Proper grounding is not an add-on. It is part of doing the work correctly.
Work on every job is performed by licensed electricians who know California electrical code and Sacramento's local inspection requirements. We make the fix and leave it tidy.
Keeping a home safe starts with the wiring behind the walls, and that starts at the panel. If your breaker box is undersized, outdated, or showing signs of wear, it is not a problem you want to put off. We handle breaker panel repair and full replacement, 200-amp service upgrades, and load calculations to make sure your home or building can handle what you are putting on it.
Sacramento's housing stock includes a significant number of older homes that were wired for a fraction of today's electrical demand. Add an EV charger, a battery backup system, or a rooftop solar array, and a panel that was marginal before can become a real problem. We run dedicated appliance circuits for ranges, dryers, HVAC units, and other high-draw equipment, and we handle service-entrance upgrades when the utility connection itself needs to grow with the load.
Whole-home rewiring is available for older properties where the existing wiring is aluminum, knob-and-tube, or simply past its useful life. Your panel is in good hands with us.
When the electrician arrives, the real work begins, and sometimes the most practical work is also the most visible. New outlets, replaced switches, and properly installed lighting change how a space feels and functions every single day.
We install and replace outlets throughout the home, including GFCI outlets in kitchens, bathrooms, garages, and outdoor areas where code requires them. Switch repair and replacement is quick work when it is done right, and we handle everything from a single toggle to multi-location dimmer setups.
For lighting, we cover the full range: recessed lighting in living rooms and kitchens, pendant and chandelier wiring in dining spaces, under-cabinet lighting, porch lights, motion-sensor and security lighting, and landscape lighting for driveways and garden beds. Outdoor lighting in particular gets a lot of use in Sacramento's long, mild summers, and a well-placed fixture makes a real difference for both security and curb appeal.
Ceiling fan installation and wiring rounds out this category. If the existing box is not rated for a fan, we swap it out before we hang anything. We'll find the fault and fix it right.
Sacramento's electrical needs have shifted noticeably over the past several years. EV adoption in California is among the highest in the country, rooftop solar is on nearly every block in some neighborhoods, and wildfire-season power shutoffs have made backup power a practical concern rather than a luxury. We're proud to be the local electricians this community calls first when these jobs come up.
A Level 2 home EV charger cuts charging time dramatically compared to a standard 120-volt outlet, and the installation is straightforward when the panel has room for it. We run a dedicated 240-volt circuit from your breaker panel to the garage, carport, or driveway location you choose, confirm the panel has the capacity to support the load, and wire the charger to manufacturer specifications. We work with Tesla Wall Connectors, ChargePoint, Enel X, and other major home charging stations. If the panel needs an upgrade first, we handle that as part of the same project. California's clean-vehicle incentives have pushed EV ownership in Sacramento well above the national average, and home charger installs have become one of our most common calls.
We do not install solar panels or battery hardware, but we handle all of the electrical work that makes those systems function safely and connect properly to your home. That means running the dedicated circuits from the array or battery system to your main panel, installing or upgrading a subpanel when the system requires it, and making sure the wiring meets California's interconnection and inspection requirements. Sacramento's sun exposure makes rooftop solar one of the most productive investments a homeowner can make, and public-safety power shutoffs during fire season have pushed a lot of households toward battery backup as well. When you are ready to add that capacity, we make sure the electrical side is done right.
A whole-home surge protector installs directly at the breaker panel and stands between your home's circuits and any voltage spike that comes through the utility line. That includes summer thunderstorm surges, which are more common in Sacramento than many residents expect, as well as the smaller, repetitive surges that come from grid switching and neighborhood load changes. Sensitive electronics, smart-home devices, and EV chargers are all vulnerable to voltage spikes that a power strip surge protector will not catch. One device at the panel protects every circuit in the house. It is one of the most cost-effective electrical upgrades we install.
Property managers trust us to keep their buildings powered, and we bring that same reliability to retail spaces, restaurants, office suites, and warehouse operations throughout Sacramento. Commercial electrical work demands accuracy and minimal disruption, and we plan our visits around your schedule whenever possible.
We handle commercial panel upgrades, branch circuit wiring, outlet installation for office and retail buildouts, and commercial lighting including interior fixtures and parking lot lighting. Restaurant and kitchen electrical work is a specialty area where load management and dedicated circuits for commercial equipment matter a great deal. Clear communication from the first call to the final test is how we keep commercial clients coming back.
Ready to get the power sorted? We offer same-day availability on most service calls and schedule weekend appointments, including Saturdays and Sundays, for customers who cannot take time off during the week. When you call for a quote, we give you transparent pricing with no hidden fees on any wiring job before we start.
Electrical safety inspections are available as a standalone service for homeowners buying or selling a property, landlords preparing a unit for new tenants, or anyone who wants a clear picture of where their home's wiring stands. We walk through the panel, the outlets, the grounding, and the visible wiring, and we give you a straightforward report of what we find.
We answer the phone. We show up on time. We test before we leave.
We serve Sacramento and Sacramento County broadly, and our crews are familiar with the neighborhoods, housing types, and permit offices throughout the region. If you are outside Sacramento proper, chances are we cover your area.
Communities we regularly serve include:
If your neighborhood is not on this list, call us anyway. We work throughout the greater Sacramento area and are happy to confirm availability for your location.
Yes. We handle residential and commercial electrical work throughout Sacramento and the surrounding area. Whether you own a single-family home, manage a rental portfolio, or operate a retail space or office building, we bring the same crew and the same standards to every job.
Call us at (279) 249-3289 and we will walk you through what the job involves and what it will cost before anything is scheduled. We give you clear pricing upfront so there are no surprises when the work is done.
Same-day availability is possible on most service calls. When you call, we will let you know what is open on the schedule and get you booked as quickly as we can. Urgent electrical issues do not have to wait.
We are available every day from 5:00 AM to 9:00 PM, including weekends. If you have an electrical issue that cannot wait until Monday, call us and we will work to get someone out to you.
We regularly serve Elk Grove, Citrus Heights, Rancho Cordova, Folsom, West Sacramento, Roseville, Natomas, and Arden-Arcade, along with other communities throughout Sacramento County. If you are not sure whether we cover your area, call and we will tell you directly.
We give you pricing before work begins, and we stick to it. If something unexpected comes up once we are inside the walls, we tell you about it and get your approval before we continue. Transparent pricing with no hidden fees on any wiring job is how we operate.
A repair addresses a specific fault in an existing circuit or device, such as a dead outlet or a tripping breaker. A panel or service upgrade replaces or expands the electrical supply to the whole building, which is typically needed when the existing panel is too small for current demand. We can help you figure out which one your situation calls for when you call for a quote.
Yes, and it helps. Showing us the outlet, switch, or panel that is giving you trouble gives us a starting point for the diagnostic. We still do a thorough check of the affected circuit and related components, but knowing where the symptom showed up first saves time.
We work with property managers regularly and understand that their needs are different. Multiple units, fast turnaround, and clear communication about what was found and what was done all matter on a rental property. Call us to talk through what your portfolio requires.
Valley Air and Electric has been serving Sacramento since 1992, and a real local person answers when you call. Whether you need same-day repair, a panel upgrade, an EV charger wired, or a safety inspection before a home sale, we are ready to schedule it.
Call (279) 249-3289 to get a quote. We will walk you through what the job involves, give you clear pricing, and get you on the schedule.
Breakers that hold. Outlets that work. Lights that stay on.
Whether you need a quick outlet repair or a full service upgrade to support a new EV charger or solar system, we handle the full range of residential and commercial electrical work in Sacramento and the surrounding area. Every job is handled by licensed electricians who know California code and local inspection requirements. The table below gives you a clear look at what we offer, who each service is right for, and what to expect when you call.
| Type of Work | Scope of Work | When You Need It | Things to Know |
|---|---|---|---|
| Dedicated Appliance Circuits | 240-volt dryer and range circuits, refrigerator and dishwasher circuits, HVAC unit supply circuits, workshop and garage circuits | homeowners adding a major appliance or experiencing nuisance tripping on shared circuits | High-draw appliances need their own circuit. Running a range or dryer on a shared line causes repeated trips and can shorten the life of the appliance. |
| Lighting Installation | recessed and pendant lighting, under-cabinet and landscape lighting, security and motion-sensor fixtures, outdoor porch and driveway lights | homeowners upgrading interiors, improving security, or adding curb appeal | Outdoor lighting gets heavy use in Sacramento's long, mild summers. A well-placed fixture adds both safety and value to the property. |
| EV Charger Installation | Level 2 charger wiring, dedicated 240-volt circuit, panel capacity check, charger mounting and connection | Sacramento EV owners who want faster, reliable home charging | California's EV adoption rate is among the highest in the country, and a Level 2 charger dramatically cuts overnight charging time compared to a standard outlet. We work with Tesla, ChargePoint, Enel X, and other major home charging stations. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, panel replacement and load balancing, service-entrance upgrades, capacity evaluation for solar or EV loads | older homes, properties adding EV chargers or solar, or any building that keeps tripping breakers under normal use | Many Sacramento homes were wired decades before today's electrical demand. A panel upgrade is often the first step before adding a charger, battery system, or additional circuits. |
| Solar & Battery Backup Electrical | dedicated solar circuit runs, battery system circuit connections, subpanel installation or upgrade, interconnection wiring to code | homeowners adding rooftop solar or a battery backup system and needing the electrical work done correctly | We handle the electrical side of solar and battery installs: the circuits, panels, and connections that make the system work safely. Sacramento's sun exposure makes solar one of the most productive home investments available. |
| Electrical Safety Inspections | panel and breaker review, outlet and grounding check, visible wiring assessment, written findings report | buyers, sellers, landlords preparing a unit, or anyone wanting a clear picture of their home's electrical condition | An inspection before a home sale or new tenancy surfaces issues early, before they become negotiating problems or liability concerns. |
| Whole-Home Surge Protection | panel-mounted surge protector installation, protection for all home circuits, defense against utility-line spikes, coverage for EV chargers and smart devices | any home with sensitive electronics, smart-home devices, or an EV charger | Summer thunderstorms and grid-switching surges are more common in Sacramento than many residents expect. One device at the panel protects every circuit in the house. |
| Outlet & Switch Installation | new outlet installation, GFCI outlet upgrades, switch replacement, dimmer and multi-location setups | homeowners adding outlets, updating kitchens or bathrooms, or replacing worn devices | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We bring existing installations up to current requirements when we are already on the job. |
| Older-Home Rewiring | aluminum wiring remediation, knob-and-tube replacement, whole-home rewire, grounding and bonding updates | owners of older Sacramento homes with aging or outdated wiring systems | Aluminum and knob-and-tube wiring carry real fire and safety risks. A rewire is a significant project, but it is also one of the most lasting improvements you can make to an older home. |
| Breaker & Fuse Repair | breaker replacement, fuse panel evaluation, repeated-trip diagnosis, AFCI and GFCI breaker upgrades | homes where a breaker trips repeatedly or refuses to reset | A breaker that trips on its own is a warning sign. Repeated tripping usually points to an overloaded circuit or a failing breaker that needs attention. |
| Standby Battery for Outages | battery backup circuit connections, transfer switch wiring, critical circuit selection, panel integration | Sacramento homeowners concerned about public-safety power shutoffs during fire season | Wildfire-season shutoffs have made battery backup a practical priority for many households in the region. We handle the electrical connections that let a battery system power your critical circuits when the grid goes down. |
| Ceiling Fan Installation | new fan mounting and wiring, fan-rated box replacement, switch and remote wiring, existing fixture swap-outs | any room where air circulation and comfort matter year-round | If the existing ceiling box is not rated for a fan's weight and movement, we replace it before installation. Skipping that step is a safety risk. |
| Hot-Tub Circuits | 240-volt dedicated circuit, GFCI breaker installation, outdoor wiring to code, disconnect installation | homeowners installing a hot tub or spa and needing a safe, code-compliant power supply | Hot tubs require a dedicated 240-volt circuit with GFCI protection and a properly rated disconnect. This is not a job for an existing general-purpose circuit. |
| Electrical Repairs & Troubleshooting | dead outlets, tripping breakers, flickering or dimming lights, intermittent power loss | any homeowner or tenant noticing something off with their power | A thorough diagnosis finds the source, not just the symptom. Many repairs are completed in a single visit. |
| Wiring & Circuit Installation | new branch circuit runs, dedicated appliance circuits, subpanel wiring, circuit extensions for additions or remodels | remodels, additions, workshops, or any space that needs new electrical capacity | All new circuit work is run to current code and is available for inspection. We pull the necessary permits when the job requires them. |
How do I know if my home needs a panel or service upgrade?
Common signs include breakers that trip frequently under normal use, a panel that feels warm to the touch, a fuse box that has never been replaced, or a home that cannot handle the load of a new appliance or EV charger without tripping. Many Sacramento homes were built with panels sized for a fraction of today's demand. If you are adding solar, a battery system, or a Level 2 charger, a capacity evaluation is a smart first step. Call us and we will walk you through what we find.
What causes a breaker to trip repeatedly?
Repeated tripping usually means one of three things: the circuit is overloaded and drawing more current than it is rated for, a device or appliance on that circuit has a fault, or the breaker itself is worn and no longer holding properly. Running a high-draw appliance like a microwave or space heater on a shared circuit is a common cause. We diagnose the actual source rather than just resetting the breaker and moving on.
Is the electrical work permitted and inspected?
Yes, when the job requires a permit, we pull it. Panel upgrades, service changes, new circuit installations, and other significant work are subject to inspection by the local authority. Work performed by our licensed electricians is done to California electrical code and Sacramento's local inspection requirements. We handle the paperwork so you do not have to.
Same-Day and Weekend Availability
We are available seven days a week from 5:00 AM to 9:00 PM, including weekends. When you call, we tell you what is open on the schedule and get you booked as quickly as possible.
How do I know if the wiring in my older Sacramento home is still safe?
Older homes can have aluminum wiring, knob-and-tube wiring, or systems that have simply aged past their useful life. Warning signs include frequent breaker trips, warm outlet covers, a burning smell near outlets or the panel, or lights that flicker without an obvious cause. An electrical safety inspection gives you a clear picture of what is behind the walls and what, if anything, needs to change.
What do I need to install a Level 2 EV charger at home?
A Level 2 charger runs on a dedicated 240-volt circuit, similar to what a dryer or range uses. We check whether your panel has the capacity to support the additional load, run the circuit to your garage or parking area, and connect the charger to manufacturer specifications. If the panel needs an upgrade first, we handle that as part of the same project. Most installations are completed in a single visit once the panel situation is confirmed.
Can you get to me the same day I call?
Same-day availability is possible on most service calls. When you call, we let you know what is open on the schedule and get you booked as quickly as we can. We are available every day from 5:00 AM to 9:00 PM, including weekends, so an urgent electrical issue does not have to wait until Monday.
Transparent Upfront Pricing
We give you clear pricing before work begins and stick to it. If something unexpected comes up mid-job, we explain it and get your approval before we continue.
Why would an outlet or switch stop working?
A dead outlet is often caused by a tripped GFCI outlet elsewhere on the same circuit, a tripped breaker, a loose wire connection behind the device, or a failed outlet that simply needs replacing. Switches fail for similar reasons: loose connections, worn contacts, or a wiring issue upstream. We trace the circuit to find the actual cause rather than swapping parts and hoping for the best.
What does it mean if my lights flicker or dim?
Occasional flickering when a large appliance starts up is usually normal. Persistent flickering, dimming that happens across multiple rooms, or lights that flicker without any obvious trigger can point to a loose connection, an overloaded circuit, or a problem at the panel or service entrance. These symptoms are worth having looked at, because the underlying cause can range from a simple fix to something that needs prompt attention.
Work Performed by Licensed Electricians
Every job is handled by licensed electricians who know California electrical code and Sacramento's local inspection requirements. We pull permits when the work calls for them and leave the job ready to pass inspection.
Is a warm or buzzing outlet a serious problem?
Yes. A warm outlet cover or a buzzing sound from an outlet or switch plate is a sign that something is wrong with the wiring or the device itself. These are not issues to leave alone. Loose connections and failing devices generate heat, and heat in a wall cavity is a fire risk. Call us and we will take a look.
How does pricing work, and will the quote change once work starts?
When you call for a quote, we give you clear pricing before anything is scheduled. We stick to that price. If something unexpected comes up once we are inside the walls, we tell you about it and get your approval before we continue. Transparent pricing with no hidden fees on any wiring job is how we operate, and it has been how we have worked since 1992.
What is surge protection, and does my home really need it?
A whole-home surge protector installs at the breaker panel and shields every circuit in the house from voltage spikes coming through the utility line. Power strips with surge protection only cover the devices plugged into them. A panel-mounted device catches surges before they reach any outlet. Sacramento sees summer thunderstorm activity and regular grid-switching events that generate the kind of low-level surges that wear down sensitive electronics over time. If you have smart-home devices, an EV charger, or any equipment you would rather not replace early, it is a worthwhile upgrade.
Every electrical situation is a little different, so call us at (279) 249-3289 and we will help you figure out exactly what your home or building needs.
(279) 249-3289